#!/usr/bin/env bash # Check permissions if [ "$(id -u)" -ne "0" ]; then echo "You need to be root" exit 1 fi SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )" # Run pre-update-hook if [ -f "${SCRIPT_DIR}/pre_update_hook.sh" ]; then bash "${SCRIPT_DIR}/pre_update_hook.sh" fi if [[ "$(uname -r)" =~ ^4\.15\.0-60 ]]; then echo "DO NOT RUN mailcow ON THIS UBUNTU KERNEL!"; echo "Please update to 5.x or use another distribution." exit 1 fi if [[ "$(uname -r)" =~ ^4\.4\. ]]; then if grep -q Ubuntu <<< $(uname -a); then echo "DO NOT RUN mailcow ON THIS UBUNTU KERNEL!" echo "Please update to linux-generic-hwe-16.04 by running \"apt-get install --install-recommends linux-generic-hwe-16.04\"" exit 1 fi echo "mailcow on a 4.4.x kernel is not supported. It may or may not work, please upgrade your kernel or continue at your own risk." read -p "Press any key to continue..." < /dev/tty fi # Exit on error and pipefail set -o pipefail # Setting high dc timeout export COMPOSE_HTTP_TIMEOUT=600 # Add /opt/bin to PATH PATH=$PATH:/opt/bin umask 0022 for bin in curl docker git awk sha1sum; do if [[ -z $(which ${bin}) ]]; then echo "Cannot find ${bin}, exiting..."; exit 1; fi done echo "checking docker compose version..."; if docker --help | grep compose then COMPOSE_COMMAND="docker compose" elif docker-compose version --short | grep -m1 "^1" > /dev/null 2>&1 then >&2 echo -e "\e[31mWARN: Your machine is using Docker-Compose v1!\e[0m" >&2 echo -e "\e[31mmailcow will drop the Docker-Compose v1 Support in December 2022\e[0m" >&2 echo -e "\e[31mPlease consider a upgrade to Docker-Compose v2.\e[0m" >&2 echo >&2 echo >&2 echo -e "\e[33mContinuing...\e[0m" sleep 3 COMPOSE_COMMAND="docker-compose" else >&2 echo -e "\e[31mCannot find Docker-Compose v1 or v2 on your System. Please install Docker-Compose v2 and re-run the Script.\e[0m" exit 1 fi export LC_ALL=C DATE=$(date +%Y-%m-%d_%H_%M_%S) BRANCH=$(cd ${SCRIPT_DIR}; git rev-parse --abbrev-ref HEAD) check_online_status() { CHECK_ONLINE_IPS=(1.1.1.1 9.9.9.9 8.8.8.8) for ip in "${CHECK_ONLINE_IPS[@]}"; do if timeout 3 ping -c 1 ${ip} > /dev/null; then return 0 fi done return 1 } prefetch_images() { [[ -z ${BRANCH} ]] && { echo -e "\e[33m\nUnknown branch...\e[0m"; exit 1; } git fetch origin #${BRANCH} while read image; do if [[ "${image}" == "robbertkl/ipv6nat" ]]; then if ! grep -qi "ipv6nat-mailcow" docker-compose.yml || grep -qi "enable_ipv6: false" docker-compose.yml; then continue fi fi RET_C=0 until docker pull ${image}; do RET_C=$((RET_C + 1)) echo -e "\e[33m\nError pulling $image, retrying...\e[0m" [ ${RET_C} -gt 3 ] && { echo -e "\e[31m\nToo many failed retries, exiting\e[0m"; exit 1; } sleep 1 done done < <(git show origin/${BRANCH}:docker-compose.yml | grep "image:" | awk '{ gsub("image:","", $3); print $2 }') } docker_garbage() { IMGS_TO_DELETE=() for container in $(grep -oP "image: \Kmailcow.+" "${SCRIPT_DIR}/docker-compose.yml"); do REPOSITORY=${container/:*} TAG=${container/*:} V_MAIN=${container/*.} V_SUB=${container/*.} EXISTING_TAGS=$(docker images | grep ${REPOSITORY} | awk '{ print $2 }') for existing_tag in ${EXISTING_TAGS[@]}; do V_MAIN_EXISTING=${existing_tag/*.} V_SUB_EXISTING=${existing_tag/*.} # Not an integer [[ ! $V_MAIN_EXISTING =~ ^[0-9]+$ ]] && continue [[ ! $V_SUB_EXISTING =~ ^[0-9]+$ ]] && continue if [[ $V_MAIN_EXISTING == "latest" ]]; then echo "Found deprecated label \"latest\" for repository $REPOSITORY, it should be deleted." IMGS_TO_DELETE+=($REPOSITORY:$existing_tag) elif [[ $V_MAIN_EXISTING -lt $V_MAIN ]]; then echo "Found tag $existing_tag for $REPOSITORY, which is older than the current tag $TAG and should be deleted." IMGS_TO_DELETE+=($REPOSITORY:$existing_tag) elif [[ $V_SUB_EXISTING -lt $V_SUB ]]; then echo "Found tag $existing_tag for $REPOSITORY, which is older than the current tag $TAG and should be deleted." IMGS_TO_DELETE+=($REPOSITORY:$existing_tag) fi done done if [[ ! -z ${IMGS_TO_DELETE[*]} ]]; then echo "Run the following command to delete unused image tags:" echo echo " docker rmi ${IMGS_TO_DELETE[*]}" echo if [ ! $FORCE ]; then read -r -p "Do you want to delete old image tags right now? [y/N] " response if [[ "$response" =~ ^([yY][eE][sS]|[yY])+$ ]]; then docker rmi ${IMGS_TO_DELETE[*]} else echo "OK, skipped." fi else echo "Running image removal without extra confirmation due to force mode." docker rmi ${IMGS_TO_DELETE[*]} fi echo -e "\e[32mFurther cleanup...\e[0m" echo "If you want to cleanup further garbage collected by Docker, please make sure all containers are up and running before cleaning your system by executing \"docker system prune\"" fi } in_array() { local e match="$1" shift for e; do [[ "$e" == "$match" ]] && return 0; done return 1 } migrate_docker_nat() { NAT_CONFIG='{"ipv6":true,"fixed-cidr-v6":"fd00:dead:beef:c0::/80","experimental":true,"ip6tables":true}' # Min Docker version DOCKERV_REQ=20.10.2 # Current Docker version DOCKERV_CUR=$(docker version -f '{{.Server.Version}}') if grep -qi "ipv6nat-mailcow" docker-compose.yml && grep -qi "enable_ipv6: true" docker-compose.yml; then echo -e "\e[32mNative IPv6 implementation available.\e[0m" echo "This will enable experimental features in the Docker daemon and configure Docker to do the IPv6 NATing instead of ipv6nat-mailcow." echo '!!! This step is recommended !!!' echo "mailcow will try to roll back the changes if starting Docker fails after modifying the daemon.json configuration file." read -r -p "Should we try to enable the native IPv6 implementation in Docker now (recommended)? [y/N] " dockernatresponse if [[ ! "${dockernatresponse}" =~ ^([yY][eE][sS]|[yY])+$ ]]; then echo "OK, skipping this step." return 0 fi fi # Sort versions and check if we are running a newer or equal version to req if [ $(printf "${DOCKERV_REQ}\n${DOCKERV_CUR}" | sort -V | tail -n1) == "${DOCKERV_CUR}" ]; then # If Dockerd daemon json exists if [ -s /etc/docker/daemon.json ]; then IFS=',' read -r -a dockerconfig <<< $(cat /etc/docker/daemon.json | tr -cd '[:alnum:],') if ! in_array ipv6true "${dockerconfig[@]}" || \ ! in_array experimentaltrue "${dockerconfig[@]}" || \ ! in_array ip6tablestrue "${dockerconfig[@]}" || \ ! grep -qi "fixed-cidr-v6" /etc/docker/daemon.json; then echo -e "\e[33mWarning:\e[0m You seem to have modified the /etc/docker/daemon.json configuration by yourself and not fully/correctly activated the native IPv6 NAT implementation." echo "You will need to merge your existing configuration manually or fix/delete the existing daemon.json configuration before trying the update process again." echo -e "Please merge the following content and restart the Docker daemon:\n" echo ${NAT_CONFIG} return 1 fi else echo "Working on IPv6 NAT, please wait..." echo ${NAT_CONFIG} > /etc/docker/daemon.json ip6tables -F -t nat [[ -e /etc/alpine-release ]] && rc-service docker restart || systemctl restart docker.service if [[ $? -ne 0 ]]; then echo -e "\e[31mError:\e[0m Failed to activate IPv6 NAT! Reverting and exiting." rm /etc/docker/daemon.json if [[ -e /etc/alpine-release ]]; then rc-service docker restart else systemctl reset-failed docker.service systemctl restart docker.service fi return 1 fi fi # Removing legacy container sed -i '/ipv6nat-mailcow:$/,/^$/d' docker-compose.yml if [ -s docker-compose.override.yml ]; then sed -i '/ipv6nat-mailcow:$/,/^$/d' docker-compose.override.yml if [[ "$(cat docker-compose.override.yml | sed '/^\s*$/d' | wc -l)" == "2" ]]; then mv docker-compose.override.yml docker-compose.override.yml_backup fi fi echo -e "\e[32mGreat! \e[0mNative IPv6 NAT is active.\e[0m" else echo -e "\e[31mPlease upgrade Docker to version ${DOCKERV_REQ} or above.\e[0m" return 0 fi } while (($#)); do case "${1}" in --check|-c) echo "Checking remote code for updates..." LATEST_REV=$(git ls-remote --exit-code --refs --quiet https://github.com/mailcow/mailcow-dockerized ${BRANCH} | cut -f1) if [ $? -ne 0 ]; then echo "A problem occurred while trying to fetch the latest revision from github." exit 99 fi if [[ -z $(git log HEAD --pretty=format:"%H" | grep "${LATEST_REV}") ]]; then echo -e "Updated code is available.\nThe changes can be found here: https://github.com/mailcow/mailcow-dockerized/commits/master" git log --date=short --pretty=format:"%ad - %s" $(git rev-parse --short HEAD)..origin/master exit 0 else echo "No updates available." exit 3 fi ;; --ours) MERGE_STRATEGY=ours ;; --skip-start) SKIP_START=y ;; --gc) echo -e "\e[32mCollecting garbage...\e[0m" docker_garbage exit 0 ;; --prefetch) echo -e "\e[32mPrefetching images...\e[0m" prefetch_images exit 0 ;; -f|--force) echo -e "\e[32mRunning in forced mode...\e[0m" FORCE=y ;; --skip-ping-check) SKIP_PING_CHECK=y ;; --help|-h) echo './update.sh [-c|--check, --ours, --gc, --no-update-compose, --prefetch, --skip-start, --skip-ping-check, -f|--force, -h|--help] -c|--check - Check for updates and exit (exit codes => 0: update available, 3: no updates) --ours - Use merge strategy option "ours" to solve conflicts in favor of non-mailcow code (local changes over remote changes), not recommended! --gc - Run garbage collector to delete old image tags --prefetch - Only prefetch new images and exit (useful to prepare updates) --skip-start - Do not start mailcow after update --skip-ping-check - Skip ICMP Check to public DNS resolvers (Use it only if you´ve blocked any ICMP Connections to your mailcow machine). -f|--force - Force update, do not ask questions ' exit 1 esac shift done [[ ! -f mailcow.conf ]] && { echo "mailcow.conf is missing"; exit 1;} chmod 600 mailcow.conf source mailcow.conf DOTS=${MAILCOW_HOSTNAME//[^.]}; if [ ${#DOTS} -lt 2 ]; then echo "MAILCOW_HOSTNAME (${MAILCOW_HOSTNAME}) is not a FQDN!" echo "Please change it to a FQDN and run ${COMPOSE_COMMAND} down followed by ${COMPOSE_COMMAND} up -d" exit 1 fi if grep --help 2>&1 | head -n 1 | grep -q -i "busybox"; then echo "BusyBox grep detected, please install gnu grep, \"apk add --no-cache --upgrade grep\""; exit 1; fi # This will also cover sort if cp --help 2>&1 | head -n 1 | grep -q -i "busybox"; then echo "BusyBox cp detected, please install coreutils, \"apk add --no-cache --upgrade coreutils\""; exit 1; fi if sed --help 2>&1 | head -n 1 | grep -q -i "busybox"; then echo "BusyBox sed detected, please install gnu sed, \"apk add --no-cache --upgrade sed\""; exit 1; fi CONFIG_ARRAY=( "SKIP_LETS_ENCRYPT" "SKIP_SOGO" "USE_WATCHDOG" "WATCHDOG_NOTIFY_EMAIL" "WATCHDOG_NOTIFY_BAN" "WATCHDOG_EXTERNAL_CHECKS" "WATCHDOG_SUBJECT" "SKIP_CLAMD" "SKIP_IP_CHECK" "ADDITIONAL_SAN" "DOVEADM_PORT" "IPV4_NETWORK" "IPV6_NETWORK" "LOG_LINES" "SNAT_TO_SOURCE" "SNAT6_TO_SOURCE" "COMPOSE_PROJECT_NAME" "SQL_PORT" "API_KEY" "API_KEY_READ_ONLY" "API_ALLOW_FROM" "MAILDIR_GC_TIME" "MAILDIR_SUB" "ACL_ANYONE" "SOLR_HEAP" "SKIP_SOLR" "ENABLE_SSL_SNI" "ALLOW_ADMIN_EMAIL_LOGIN" "SKIP_HTTP_VERIFICATION" "SOGO_EXPIRE_SESSION" "REDIS_PORT" "DOVECOT_MASTER_USER" "DOVECOT_MASTER_PASS" "MAILCOW_PASS_SCHEME" "ADDITIONAL_SERVER_NAMES" "ACME_CONTACT" "WATCHDOG_VERBOSE" "WEBAUTHN_ONLY_TRUSTED_VENDORS" ) sed -i --follow-symlinks '$a\' mailcow.conf for option in ${CONFIG_ARRAY[@]}; do if [[ ${option} == "ADDITIONAL_SAN" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo "${option}=" >> mailcow.conf fi elif [[ ${option} == "COMPOSE_PROJECT_NAME" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo "COMPOSE_PROJECT_NAME=mailcowdockerized" >> mailcow.conf fi elif [[ ${option} == "DOVEADM_PORT" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo "DOVEADM_PORT=127.0.0.1:19991" >> mailcow.conf fi elif [[ ${option} == "WATCHDOG_NOTIFY_EMAIL" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo "WATCHDOG_NOTIFY_EMAIL=" >> mailcow.conf fi elif [[ ${option} == "LOG_LINES" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Max log lines per service to keep in Redis logs' >> mailcow.conf echo "LOG_LINES=9999" >> mailcow.conf fi elif [[ ${option} == "IPV4_NETWORK" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Internal IPv4 /24 subnet, format n.n.n. (expands to n.n.n.0/24)' >> mailcow.conf echo "IPV4_NETWORK=172.22.1" >> mailcow.conf fi elif [[ ${option} == "IPV6_NETWORK" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Internal IPv6 subnet in fc00::/7' >> mailcow.conf echo "IPV6_NETWORK=fd4d:6169:6c63:6f77::/64" >> mailcow.conf fi elif [[ ${option} == "SQL_PORT" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Bind SQL to 127.0.0.1 on port 13306' >> mailcow.conf echo "SQL_PORT=127.0.0.1:13306" >> mailcow.conf fi elif [[ ${option} == "API_KEY" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Create or override API key for web UI' >> mailcow.conf echo "#API_KEY=" >> mailcow.conf fi elif [[ ${option} == "API_KEY_READ_ONLY" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Create or override read-only API key for web UI' >> mailcow.conf echo "#API_KEY_READ_ONLY=" >> mailcow.conf fi elif [[ ${option} == "API_ALLOW_FROM" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Must be set for API_KEY to be active' >> mailcow.conf echo '# IPs only, no networks (networks can be set via UI)' >> mailcow.conf echo "#API_ALLOW_FROM=" >> mailcow.conf fi elif [[ ${option} == "SNAT_TO_SOURCE" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Use this IPv4 for outgoing connections (SNAT)' >> mailcow.conf echo "#SNAT_TO_SOURCE=" >> mailcow.conf fi elif [[ ${option} == "SNAT6_TO_SOURCE" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Use this IPv6 for outgoing connections (SNAT)' >> mailcow.conf echo "#SNAT6_TO_SOURCE=" >> mailcow.conf fi elif [[ ${option} == "MAILDIR_GC_TIME" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Garbage collector cleanup' >> mailcow.conf echo '# Deleted domains and mailboxes are moved to /var/vmail/_garbage/timestamp_sanitizedstring' >> mailcow.conf echo '# How long should objects remain in the garbage until they are being deleted? (value in minutes)' >> mailcow.conf echo '# Check interval is hourly' >> mailcow.conf echo 'MAILDIR_GC_TIME=1440' >> mailcow.conf fi elif [[ ${option} == "ACL_ANYONE" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Set this to "allow" to enable the anyone pseudo user. Disabled by default.' >> mailcow.conf echo '# When enabled, ACL can be created, that apply to "All authenticated users"' >> mailcow.conf echo '# This should probably only be activated on mail hosts, that are used exclusivly by one organisation.' >> mailcow.conf echo '# Otherwise a user might share data with too many other users.' >> mailcow.conf echo 'ACL_ANYONE=disallow' >> mailcow.conf fi elif [[ ${option} == "SOLR_HEAP" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Solr heap size, there is no recommendation, please see Solr docs.' >> mailcow.conf echo '# Solr is a prone to run OOM on large systems and should be monitored. Unmonitored Solr setups are not recommended.' >> mailcow.conf echo '# Solr will refuse to start with total system memory below or equal to 2 GB.' >> mailcow.conf echo "SOLR_HEAP=1024" >> mailcow.conf fi elif [[ ${option} == "SKIP_SOLR" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Solr is disabled by default after upgrading from non-Solr to Solr-enabled mailcows.' >> mailcow.conf echo '# Disable Solr or if you do not want to store a readable index of your mails in solr-vol-1.' >> mailcow.conf echo "SKIP_SOLR=y" >> mailcow.conf fi elif [[ ${option} == "ENABLE_SSL_SNI" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Create seperate certificates for all domains - y/n' >> mailcow.conf echo '# this will allow adding more than 100 domains, but some email clients will not be able to connect with alternative hostnames' >> mailcow.conf echo '# see https://wiki.dovecot.org/SSL/SNIClientSupport' >> mailcow.conf echo "ENABLE_SSL_SNI=n" >> mailcow.conf fi elif [[ ${option} == "SKIP_SOGO" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Skip SOGo: Will disable SOGo integration and therefore webmail, DAV protocols and ActiveSync support (experimental, unsupported, not fully implemented) - y/n' >> mailcow.conf echo "SKIP_SOGO=n" >> mailcow.conf fi elif [[ ${option} == "MAILDIR_SUB" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# MAILDIR_SUB defines a path in a users virtual home to keep the maildir in. Leave empty for updated setups.' >> mailcow.conf echo "#MAILDIR_SUB=Maildir" >> mailcow.conf echo "MAILDIR_SUB=" >> mailcow.conf fi elif [[ ${option} == "WATCHDOG_NOTIFY_BAN" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Notify about banned IP. Includes whois lookup.' >> mailcow.conf echo "WATCHDOG_NOTIFY_BAN=y" >> mailcow.conf fi elif [[ ${option} == "WATCHDOG_SUBJECT" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Subject for watchdog mails. Defaults to "Watchdog ALERT" followed by the error message.' >> mailcow.conf echo "#WATCHDOG_SUBJECT=" >> mailcow.conf fi elif [[ ${option} == "WATCHDOG_EXTERNAL_CHECKS" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Checks if mailcow is an open relay. Requires a SAL. More checks will follow.' >> mailcow.conf echo '# No data is collected. Opt-in and anonymous.' >> mailcow.conf echo '# Will only work with unmodified mailcow setups.' >> mailcow.conf echo "WATCHDOG_EXTERNAL_CHECKS=n" >> mailcow.conf fi elif [[ ${option} == "SOGO_EXPIRE_SESSION" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# SOGo session timeout in minutes' >> mailcow.conf echo "SOGO_EXPIRE_SESSION=480" >> mailcow.conf fi elif [[ ${option} == "REDIS_PORT" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo "REDIS_PORT=127.0.0.1:7654" >> mailcow.conf fi elif [[ ${option} == "DOVECOT_MASTER_USER" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# DOVECOT_MASTER_USER and _PASS must _both_ be provided. No special chars.' >> mailcow.conf echo '# Empty by default to auto-generate master user and password on start.' >> mailcow.conf echo '# User expands to DOVECOT_MASTER_USER@mailcow.local' >> mailcow.conf echo '# LEAVE EMPTY IF UNSURE' >> mailcow.conf echo "DOVECOT_MASTER_USER=" >> mailcow.conf fi elif [[ ${option} == "DOVECOT_MASTER_PASS" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# LEAVE EMPTY IF UNSURE' >> mailcow.conf echo "DOVECOT_MASTER_PASS=" >> mailcow.conf fi elif [[ ${option} == "MAILCOW_PASS_SCHEME" ]]; then if ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo '# Password hash algorithm' >> mailcow.conf echo '# Only certain password hash algorithm are supported. For a fully list of supported schemes,' >> mailcow.conf echo '# see https://mailcow.github.io/mailcow-dockerized-docs/models/model-passwd/' >> mailcow.conf echo "MAILCOW_PASS_SCHEME=BLF-CRYPT" >> mailcow.conf fi elif [[ ${option} == "ADDITIONAL_SERVER_NAMES" ]]; then if ! grep -q ${option} mailcow.conf; then echo '# Additional server names for mailcow UI' >> mailcow.conf echo '#' >> mailcow.conf echo '# Specify alternative addresses for the mailcow UI to respond to' >> mailcow.conf echo '# This is useful when you set mail.* as ADDITIONAL_SAN and want to make sure mail.maildomain.com will always point to the mailcow UI.' >> mailcow.conf echo '# If the server name does not match a known site, Nginx decides by best-guess and may redirect users to the wrong web root.' >> mailcow.conf echo '# You can understand this as server_name directive in Nginx.' >> mailcow.conf echo '# Comma separated list without spaces! Example: ADDITIONAL_SERVER_NAMES=a.b.c,d.e.f' >> mailcow.conf echo 'ADDITIONAL_SERVER_NAMES=' >> mailcow.conf fi elif [[ ${option} == "ACME_CONTACT" ]]; then if ! grep -q ${option} mailcow.conf; then echo '# Lets Encrypt registration contact information' >> mailcow.conf echo '# Optional: Leave empty for none' >> mailcow.conf echo '# This value is only used on first order!' >> mailcow.conf echo '# Setting it at a later point will require the following steps:' >> mailcow.conf echo '# https://mailcow.github.io/mailcow-dockerized-docs/troubleshooting/debug-reset_tls/' >> mailcow.conf echo 'ACME_CONTACT=' >> mailcow.conf fi elif [[ ${option} == "WEBAUTHN_ONLY_TRUSTED_VENDORS" ]]; then if ! grep -q ${option} mailcow.conf; then echo "# WebAuthn device manufacturer verification" >> mailcow.conf echo '# After setting WEBAUTHN_ONLY_TRUSTED_VENDORS=y only devices from trusted manufacturers are allowed' >> mailcow.conf echo '# root certificates can be placed for validation under mailcow-dockerized/data/web/inc/lib/WebAuthn/rootCertificates' >> mailcow.conf echo 'WEBAUTHN_ONLY_TRUSTED_VENDORS=n' >> mailcow.conf fi elif [[ ${option} == "WATCHDOG_VERBOSE" ]]; then if ! grep -q ${option} mailcow.conf; then echo '# Enable watchdog verbose logging' >> mailcow.conf echo 'WATCHDOG_VERBOSE=n' >> mailcow.conf fi elif ! grep -q ${option} mailcow.conf; then echo "Adding new option \"${option}\" to mailcow.conf" echo "${option}=n" >> mailcow.conf fi done if [[( ${SKIP_PING_CHECK} == "y")]]; then echo -e "\e[32mSkipping Ping Check...\e[0m" else echo -en "Checking internet connection... " if ! check_online_status; then echo -e "\e[31mfailed\e[0m" exit 1 else echo -e "\e[32mOK\e[0m" fi fi echo -e "\e[32mChecking for newer update script...\e[0m" SHA1_1=$(sha1sum update.sh) git fetch origin #${BRANCH} git checkout origin/${BRANCH} update.sh SHA1_2=$(sha1sum update.sh) if [[ ${SHA1_1} != ${SHA1_2} ]]; then echo "update.sh changed, please run this script again, exiting." chmod +x update.sh exit 2 fi if [[ -f mailcow.conf ]]; then source mailcow.conf else echo -e "\e[31mNo mailcow.conf - is mailcow installed?\e[0m" exit 1 fi if [ ! $FORCE ]; then read -r -p "Are you sure you want to update mailcow: dockerized? All containers will be stopped. [y/N] " response if [[ ! "${response}" =~ ^([yY][eE][sS]|[yY])+$ ]]; then echo "OK, exiting." exit 0 fi migrate_docker_nat fi echo -e "\e[32mValidating docker-compose stack configuration...\e[0m" if ! ${COMPOSE_COMMAND} config -q; then echo -e "\e[31m\nOh no, something went wrong. Please check the error message above.\e[0m" exit 1 fi echo -e "\e[32mChecking for conflicting bridges...\e[0m" MAILCOW_BRIDGE=$(${COMPOSE_COMMAND} config | grep -i com.docker.network.bridge.name | cut -d':' -f2) while read NAT_ID; do iptables -t nat -D POSTROUTING $NAT_ID done < <(iptables -L -vn -t nat --line-numbers | grep $IPV4_NETWORK | grep -E 'MASQUERADE.*all' | grep -v ${MAILCOW_BRIDGE} | cut -d' ' -f1) DIFF_DIRECTORY=update_diffs DIFF_FILE=${DIFF_DIRECTORY}/diff_before_update_$(date +"%Y-%m-%d-%H-%M-%S") mv diff_before_update* ${DIFF_DIRECTORY}/ 2> /dev/null if ! git diff-index --quiet HEAD; then echo -e "\e[32mSaving diff to ${DIFF_FILE}...\e[0m" mkdir -p ${DIFF_DIRECTORY} git diff --stat > ${DIFF_FILE} git diff >> ${DIFF_FILE} fi echo -e "\e[32mPrefetching images...\e[0m" prefetch_images echo -e "\e[32mStopping mailcow...\e[0m" sleep 2 MAILCOW_CONTAINERS=($(${COMPOSE_COMMAND} ps -q)) ${COMPOSE_COMMAND} down echo -e "\e[32mChecking for remaining containers...\e[0m" sleep 2 for container in "${MAILCOW_CONTAINERS[@]}"; do docker rm -f "$container" 2> /dev/null done [[ -f data/conf/nginx/ZZZ-ejabberd.conf ]] && rm data/conf/nginx/ZZZ-ejabberd.conf # Silently fixing remote url from andryyy to mailcow git remote set-url origin https://github.com/mailcow/mailcow-dockerized echo -e "\e[32mCommitting current status...\e[0m" [[ -z "$(git config user.name)" ]] && git config user.name moo [[ -z "$(git config user.email)" ]] && git config user.email moo@cow.moo [[ ! -z $(git ls-files data/conf/rspamd/override.d/worker-controller-password.inc) ]] && git rm data/conf/rspamd/override.d/worker-controller-password.inc git add -u git commit -am "Before update on ${DATE}" > /dev/null echo -e "\e[32mFetching updated code from remote...\e[0m" git fetch origin #${BRANCH} echo -e "\e[32mMerging local with remote code (recursive, strategy: \"${MERGE_STRATEGY:-theirs}\", options: \"patience\"...\e[0m" git config merge.defaultToUpstream true git merge -X${MERGE_STRATEGY:-theirs} -Xpatience -m "After update on ${DATE}" # Need to use a variable to not pass return codes of if checks MERGE_RETURN=$? if [[ ${MERGE_RETURN} == 128 ]]; then echo -e "\e[31m\nOh no, what happened?\n=> You most likely added files to your local mailcow instance that were now added to the official mailcow repository. Please move them to another location before updating mailcow.\e[0m" exit 1 elif [[ ${MERGE_RETURN} == 1 ]]; then echo -e "\e[93mPotenial conflict, trying to fix...\e[0m" git status --porcelain | grep -E "UD|DU" | awk '{print $2}' | xargs rm -v git add -A git commit -m "After update on ${DATE}" > /dev/null git checkout . echo -e "\e[32mRemoved and recreated files if necessary.\e[0m" elif [[ ${MERGE_RETURN} != 0 ]]; then echo -e "\e[31m\nOh no, something went wrong. Please check the error message above.\e[0m" echo echo "Run ${COMPOSE_COMMAND} up -d to restart your stack without updates or try again after fixing the mentioned errors." exit 1 fi echo -e "\e[33mNot fetching latest docker-compose, please check for updates manually!\e[0m" sleep 3 echo -e "\e[32mFetching new images, if any...\e[0m" sleep 2 ${COMPOSE_COMMAND} pull # Fix missing SSL, does not overwrite existing files [[ ! -d data/assets/ssl ]] && mkdir -p data/assets/ssl cp -n -d data/assets/ssl-example/*.pem data/assets/ssl/ echo -e "Checking IPv6 settings... " if grep -q 'SYSCTL_IPV6_DISABLED=1' mailcow.conf; then echo echo '!! IMPORTANT !!' echo echo 'SYSCTL_IPV6_DISABLED was removed due to complications. IPv6 can be disabled by editing "docker-compose.yml" and setting "enable_ipv6: true" to "enable_ipv6: false".' echo 'This setting will only be active after a complete shutdown of mailcow by running "docker-compose down" followed by "docker-compose up -d".' echo echo '!! IMPORTANT !!' echo read -p "Press any key to continue..." < /dev/tty fi # Checking for old project name bug sed -i --follow-symlinks 's#COMPOSEPROJECT_NAME#COMPOSE_PROJECT_NAME#g' mailcow.conf # Fix Rspamd maps if [ -f data/conf/rspamd/custom/global_from_blacklist.map ]; then mv data/conf/rspamd/custom/global_from_blacklist.map data/conf/rspamd/custom/global_smtp_from_blacklist.map fi if [ -f data/conf/rspamd/custom/global_from_whitelist.map ]; then mv data/conf/rspamd/custom/global_from_whitelist.map data/conf/rspamd/custom/global_smtp_from_whitelist.map fi # Fix deprecated metrics.conf if [ -f "data/conf/rspamd/local.d/metrics.conf" ]; then if [ ! -z "$(git diff --name-only origin/master data/conf/rspamd/local.d/metrics.conf)" ]; then echo -e "\e[33mWARNING\e[0m - Please migrate your customizations of data/conf/rspamd/local.d/metrics.conf to actions.conf and groups.conf after this update." echo "The deprecated configuration file metrics.conf will be moved to metrics.conf_deprecated after updating mailcow." fi mv data/conf/rspamd/local.d/metrics.conf data/conf/rspamd/local.d/metrics.conf_deprecated fi # Set app_info.inc.php mailcow_git_version=$(git describe --tags `git rev-list --tags --max-count=1`) if [ $? -eq 0 ]; then echo ' data/web/inc/app_info.inc.php echo ' $MAILCOW_GIT_VERSION="'$mailcow_git_version'";' >> data/web/inc/app_info.inc.php echo ' $MAILCOW_GIT_URL="https://github.com/mailcow/mailcow-dockerized";' >> data/web/inc/app_info.inc.php echo '?>' >> data/web/inc/app_info.inc.php else echo ' data/web/inc/app_info.inc.php echo ' $MAILCOW_GIT_VERSION="";' >> data/web/inc/app_info.inc.php echo ' $MAILCOW_GIT_URL="";' >> data/web/inc/app_info.inc.php echo '?>' >> data/web/inc/app_info.inc.php echo -e "\e[33mCannot determine current git repository version...\e[0m" fi if [[ ${SKIP_START} == "y" ]]; then echo -e "\e[33mNot starting mailcow, please run \"${COMPOSE_COMMAND} up -d --remove-orphans\" to start mailcow.\e[0m" else echo -e "\e[32mStarting mailcow...\e[0m" sleep 2 ${COMPOSE_COMMAND} up -d --remove-orphans fi echo -e "\e[32mCollecting garbage...\e[0m" docker_garbage # Run post-update-hook if [ -f "${SCRIPT_DIR}/post_update_hook.sh" ]; then bash "${SCRIPT_DIR}/post_update_hook.sh" fi #echo "In case you encounter any problem, hard-reset to a state before updating mailcow:" #echo #git reflog --color=always | grep "Before update on " #echo #echo "Use \"git reset --hard hash-on-the-left\" and run ${COMPOSE_COMMAND} up -d afterwards."